Training for work above the ground: fall protection, ladders, scaffolds, temporary work platforms and aerial work platforms (MEWPs). Start with awareness for anyone near an edge, then add the course for the equipment your crew actually uses.
12 courses
MEWP Supervisor (about 1 hour 27 minutes) — Supervisor and employer training for the person who PLANS, SELECTS, and OVERSEES Mobile Elevating Work Platform (MEWP) work — scissor lifts and boom lifts — rather than the person…
Scaffold Supervisor / Lead Hand (about 1 hour 20 minutes) — Training for the supervisor and lead hand who runs the scaffold system — the person who designates the competent person, assigns trained workers, plans the work, runs the scaffold…
Scaffold Competent Person / Inspector (about 1 hour 30 minutes) — Knowledge training for the scaffold competent person and inspector — the person who inspects a scaffold, decides whether it may be used, applies the tag, and documents the…
Temporary Work Platform Awareness (about 1 hour 10 minutes) — Temporary work platform awareness training for every worker who needs to reach work at height with something other than a ladder or a full scaffold — in construction, maintenance…
MEWP Trained Occupant (about 1 hour 18 minutes) — Trained-occupant training for workers who RIDE in a Mobile Elevating Work Platform (MEWP) — a scissor lift or boom lift — but do NOT operate or drive it (an "occupant").
MEWP / Aerial Awareness (about 1 hour 10 minutes) — Awareness training for ground crew and anyone who works near, under, or around Mobile Elevating Work Platforms (MEWPs) — scissor lifts and boom lifts — WITHOUT operating them.
Scaffold User & Platform Awareness (about 1 hour) — Scaffold user and temporary work platform awareness training for every worker who steps onto a scaffold someone else built — in construction, masonry, industrial maintenance…
Scaffold Hazard Awareness (about 1 hour 15 minutes) — Scaffold hazard recognition training for every worker who works on, under, or around scaffolds and temporary work platforms — in construction, masonry, industrial maintenance…
Fall Protection (about 1 hour 50 minutes) — Fall Protection is the training course for workers who use fall protection systems — full-body harnesses, lanyards and energy absorbers, lifelines, anchors, travel restraint and…
Ladder Safety — Working at Heights (about 1 hour 15 minutes) — Ladder safety and working-at-heights training aligned with the Manitoba WSH Act, WSH Regulation MR 217/2006 Part 13 (the Part that carries the ladder duties), and CSA Z11-18…
Fall Protection Awareness — Working at Heights (about 1 hour 30 minutes) — This is the awareness course in Orientra’s fall protection series. It is for people who work at or near heights but do not use a fall protection system — travel restraint or fall…